How to Install a Humbucker in a Telecaster

Yesterday was the day, I installed the neck position humbucker into my 99 US Fender Telecaster.

This is the finished result…

1999 USA made Fender Telecaster with Humbucker Installed

1999 USA made Fender Telecaster with Humbucker Installed


Fender Custom Game Of Thrones 3 Guitar Complete Set Pre-Order

$90,000.00
End Date: Friday May-29-2020 6:19:17 PDT
Buy It Now for only: $90,000.00
Buy It Now | Add to watch list

I must admit that I am extremely pleased with how it turned out. So if this is something you are considering doing to your Tele, then following pics will walk you through the process of how to install a humbucker in a telecaster.

The first step was to remove the original pickguard.

Removing the Pick Guard from my 1999 USA made Fender Telecaster

Removing the Pick Guard from my 1999 USA made Fender Telecaster

The next thing we did before de-soldering the original pickup wiring, was make sure the new guard was going to fit the neck heel, and all the screw holes would line up, which they did. Otherwise, if the guard wasn’t going to fit and we went ahead and de-soldered the pickup before checking, we would have just wasted a whole heap of time by having the re-solder everything up again while we sourced a new pick guard.

Testing New Pick Guard Size on my Telecaster

Testing New Pick Guard Size on my Telecaster


1965 VINTAGE FENDER ELECTRIC GUITAR COURSE CERTIFICATE OF ACHIEVEMENT BIN $9.95

$9.95
End Date: Monday Jun-15-2020 13:36:56 PDT
Buy It Now for only: $9.95
Buy It Now | Add to watch list

Once we were confident everything would fit, it was time to remove the neck. I love Fender’s, just four screws and the neck is off!

Installing a Humbucker - Removing the neck

Installing a Humbucker – Removing the neck

Next step was to remove the old pick-up by de-soldering the wires attached to the selector switch and volume and tone controls.

How to Install a Humbucker in a Telecaster - Removing the Old Pickup

How to Install a Humbucker in a Telecaster – Removing the Old Pickup


1968 fender telecaster rosewood fretboard factory bigsby

$5,200.00 (0 Bids)
End Date: Monday Jun-1-2020 15:06:47 PDT
Bid now | Add to watch list

With the pick guard off completely, it’s time to start marking out the routing.

How to Install a Humbucker in a Telecaster - Removing the Old Pick Guard

How to Install a Humbucker in a Telecaster – Removing the Old Pick Guard

To make sure the routing was going in the right spot, we positioned the pick guard on the body where it should be. Positioning the pick guard in the exact spot allowed us to get a precise positioning for the routing.

Routing a Humbucker In a Fender Telecaster

Routing a Humbucker In a Fender Telecaster


Brand New Fender Limited Edition Cabronita Telecaster Aztec Gold w/OHSC!

$1,899.00
End Date: Monday May-25-2020 15:51:59 PDT
Buy It Now for only: $1,899.00
Buy It Now | Add to watch list

Next step was to scribe the pickup position onto the body so we knew where to cut. Using a sharp scribe and the pick guard as a template, we scratched out the line we would follow when routing the hole.

Scribing the Humbucker Position

Scribing the Humbucker Position

Once we had our lines scribed onto the body we added some masking tape on the outer side of the hole we were going to cut. This helps to protect the body from scratches that may occur during routing.

Protecting the Body From Scratches Using Masking Tape

Protecting the Body From Scratches Using Masking Tape


1958 Gretsch 6120 Black One-of-a-kind Custom Guitar Chet Atkins

$49,999.00
End Date: Friday Jun-19-2020 17:18:56 PDT
Buy It Now for only: $49,999.00
Buy It Now | Add to watch list

Protecting the Body From Scratches Using Masking Tape

Protecting the Body From Scratches Using Masking Tape

Next step was to start routing out the bigger hole to allow for the larger pickup size. No turning back now!!! But, before we start cutting, we just want to make sure the routing bit wasn’t in too deep, so a couple of final checks and we’re ready to go.

How To Install A Humbucker In A Telecaster - One Last Check for Routing Bit Depth

How To Install A Humbucker In A Telecaster – One Last Check for Routing Bit Depth


1961 Gibson Super 400 CES "Special" custom ordered (GIE1124)

$31,900.00
End Date: Sunday May-31-2020 15:16:33 PDT
Buy It Now for only: $31,900.00
Buy It Now | Add to watch list

Once we were happy with everything, it was time to make some noise and dust…

How To Install A Humbucker In A Telecaster - Started Routing

How To Install A Humbucker In A Telecaster – Started Routing

How To Install A Humbucker In A Telecaster - Routing

How To Install A Humbucker In A Telecaster – Routing

After about 10 minutes of routing, we have a nice and tidy new hole the size of a Humbucker…

How to Install a Humbucker in a Telecaster - Routing Almost Done

How to Install a Humbucker in a Telecaster – Routing Almost Done


HSS Humbucker Single Coil Pickups - Black - Volume Tone Pots Selector Switch

$17.99
End Date: Wednesday May-27-2020 12:53:22 PDT
Buy It Now for only: $17.99
Buy It Now | Add to watch list

Once the majority of the routing had been done, just a quick check to see if the pickup would fit.

How to Install a Humbucker in a Telecaster - Checking if Humbucker Fits

How to Install a Humbucker in a Telecaster – Checking if Humbucker Fits

Then, with a very sharp chisel, some minor tweaking was needed to square up the corners, where the round bit of the router couldn’t get into.

How to Install a Humbucker in a Telecaster - Minor Adjustments with a Chisel

How to Install a Humbucker in a Telecaster – Minor Adjustments with a Chisel


1973 Fender Telecaster Natural Finish w/ Factory Bigsby - Rare

$4,250.00
End Date: Thursday Jun-25-2020 15:00:11 PDT
Buy It Now for only: $4,250.00
Buy It Now | Add to watch list

So after the fine tuning with the chisel our humbucker routing is done, time for a clean-up and blow off the dust with a little compressed air.

How to Install a Humbucker in a Telecaster - Cleaning Off The Dust

How to Install a Humbucker in a Telecaster – Cleaning Off The Dust

…and just to make sure everything is going according to plan, a little input and help from my son Luke.

How to Install a Humbucker in a Telecaster - Luke

How to Install a Humbucker in a Telecaster – Luke


1970s Fender Super Lead 2 Guitar with case

$785.00
End Date: Monday May-25-2020 19:07:58 PDT
Buy It Now for only: $785.00
Buy It Now | Add to watch list

So, with the routing done, and all of the dust cleaned up, it’s time to screw in the new pick guard, and one last comparison check.

How to Install a Humbucker in a Telecaster - New Pickguard Installed

How to Install a Humbucker in a Telecaster – New Pickguard Installed

With the new pick guard on, the next step was to wire it in.

How to Install a Humbucker in a Telecaster - Soldering In the Pickup

How to Install a Humbucker in a Telecaster – Soldering In the Pickup



Screw in the volume and tone control plate.

How to Install a Humbucker in a Telecaster - Screwing in the Control Plate

How to Install a Humbucker in a Telecaster – Screwing in the Control Plate

Then refit the neck. Which fits perfectly into the new pick guard.

How to Install a Humbucker in a Telecaster - Refitting the Neck

How to Install a Humbucker in a Telecaster – Refitting the Neck


1957 GIBSON LES PAUL PAF HUMBUCKER PICKUP MATCHED SET - ONE OWNER * EXCELLENT *

$8,500.00
End Date: Tuesday Jun-9-2020 1:50:47 PDT
Buy It Now for only: $8,500.00
Buy It Now | Add to watch list

String it up.

How to Install a Humbucker in a Telecaster - Re-string the Guitar

How to Install a Humbucker in a Telecaster – Re-string the Guitar

And play.

How to Install a Humbucker in a Telecaster - Testing New Humbucker

How to Install a Humbucker in a Telecaster – Testing New Humbucker


Vintage GIBSON PAF PICKUP PAIR

$5,999.00
End Date: Wednesday Jun-24-2020 13:47:50 PDT
Buy It Now for only: $5,999.00
Buy It Now | Add to watch list

The result speaks for itself I think.

How to Install A Humbucker - Finished

How to Install A Humbucker – Finished

How to Install A Humbucker - Finished

How to Install A Humbucker – Finished

How to Install A Humbucker - Finished

How to Install A Humbucker – Finished


Fender Custom Game Of Thrones 3 Guitar Complete Set Pre-Order

$90,000.00
End Date: Friday May-29-2020 6:19:17 PDT
Buy It Now for only: $90,000.00
Buy It Now | Add to watch list

Fender Custom Shop Paul Waller Masterbuilt Jimmy Page Mirror and Dragon Telecast

$50,000.00
End Date: Saturday Jun-6-2020 23:49:39 PDT
Buy It Now for only: $50,000.00
Buy It Now | Add to watch list

Original Electronics 1953 Fender Telecaster with Original Tweed case...

$48,999.99 (0 Bids)
End Date: Sunday May-31-2020 13:24:28 PDT
Bid now | Add to watch list

Tony Sheridan's Personal Guitar

$45,000.00
End Date: Thursday May-28-2020 9:21:13 PDT
Buy It Now for only: $45,000.00
Buy It Now | Add to watch list

Fender Custom Shop Tarot Telecaster Masterbuilt Ron Thorn

$42,000.00
End Date: Wednesday Jun-3-2020 15:46:00 PDT
Buy It Now for only: $42,000.00
Buy It Now | Add to watch list